Antlia OIII Pro narrowband filter optimizes the FWHM (full width half maximum) to 3nm bandpass. As the bandwidth becomes narrower, the 3nm Pro narrowband filters enhance contrast of emission targets by lowering the unwanted background signal. Antlia OIII 3nm Pro filters are designed to deliver 88% transmission at the 500.7nm line which provides you with the maximum signal and well defined nebulae structures.
Conventional broader narrowband filters cause a heavy loss in transmission due to the strong Center Wavelength (CWL) shift. We guarantee T>88% within 1nm range of the center bandwidth, which means that the 3nm Pro narrowband filter can guarantee high transmittance for working with both long focal ratios and fast optical systems. Blue shift data shows that Antlia 3nm Pro filters can be used with nearly all systems as fast as f/3 with minimal loss in emission signal and meets the requirements of fast optics.
The out of band blocking specification is rated OD5 (0.001%) which delivers an excellent SNR(signal to noise ratio) and effective cut off rate to minimize interference from other wavelengths. Improved sharp cut off astrophotography 3nm Pro filters are designed to minimize halos around bright stars.
Application and Performance:
High transmittance and smallest bandwidth to maximize contrast
Steep spectral profile minimizes halos around bright stars
A single substrate to eliminate internal reflections
Narrowband Objects: OIII Emission Nebulae, Planetary, Wolf Rayet Nebulae and Supernova Remnants
Use in light polluted areas and dark sites
Extends imaging time when the moon is up
Antlia narrowband Pro filters can be used down to f/3 systems with minimal loss of signal
All Antlia unmounted narrowband filters are edge blackened to eliminate internal reflections from stray light
Superior optical reliability reduces post image processing
This filter is only effective for deep sky objects that contain OIII emissions
Technical Specifications:
Basic Substrate: Optical, Single / Non-glued substrate
Filter Thickness: 2mm+/-0.05mm for 1.25”, 2” mounted, Dia31mm and Dia36mm unmounted
3mm+/-0.05mm for Dia50mm and square 50x50mm unmounted
FWHM (Full width at half maximum): 3nm
CWL (Central Wavelength): 500.7nm
Peak Transmission: ＞88%
Blocking: > 5 OD(0.001% out of band blocking) @ 300-1000nm
Surface Quality: S/D (scratch/dig)= 60/40 (Refer to MIL-O-13830)
Transmitted Wavefront: Lambda/4 or better.
Parallelism: less than 30 arcsec
Warranty: 3-years against delamination
Spectrum Curve:
Filter Ring:
1.25''(M28.5*0.6)，2'' (M48*0.75)
Ultra-thin filter cell to minimize vignetting, Black anodized finish, Laser engraving No fading
Available Sizes：
Mounted： 1.25''， 2''
Unmounted：Dia31mm，Dia36mm，Dia50mm, square 50x50mm
Not Recommended:
Solar imaging
Night visual observation
Not Permitted:
DO NOT LOOK AT THE SUN WITH THIS FILTER
Serious eye damage will result if you fail to observe the warning
